(90Cr18MoV) 9Cr18MoV Stainless Steel Equivalent, Chemical Composition, Mechanical Properties

0
90Cr18MoV 9Cr18MoV Stainless Steel
A Knife made from 9Cr18MoV Steel

Introduction

9Cr18MoV (old name) = 90Cr18MoV (new name)

9Cr18MoV stainless steel is a high carbon martensitic stainless steel, and mainly used to manufacture parts that resist strong friction and work in corrosive media, such as stainless steel blades, mechanical cutting tools, surgical blades, measuring tools, and other high-wear parts.

The performance and use of 9Cr18MoV steel (90Cr18MoV) is similar to 9Cr18. Due to the addition of molybdenum (Mo) and vanadium (V), the thermal strength and tempering resistance are better than 9Cr18 steel.

Datasheet & Specification

The following tables list the 9Cr18MoV datasheet such as chemical composition and mechanical properties, etc.

(90Cr18MoV) 9Cr18MoV Steel Chemical Composition

Chemical Composition (%)
Steel GradeCSi (≤)Mn (≤)P (≤)S (≤)Ni (≤)CrMoV
9Cr18MoV
(90Cr18MoV)
0.85-0.950.800.800.040.030.6017.00-19.001.00-1.300.07-0.12

Mechanical Properties of 9Cr18MoV Stainless Steel

  • 9Cr18MoV material hardness: ≥55 HRC (Quenched and tempered);
  • Material hardness: ≤269 HBW (Annealed)

Physical Properties

  • Density (g/cm3): 7.70
  • Specific heat capacity (J/Kg·K): 460 at 0-100℃
  • Thermal conductivity (W/m·K): 29.3 at 100℃
  • Coefficients of linear thermal expansion (10-6/K):
    • 10.5 (0-100℃)
    • 12.0 (0-500℃)
  • Electrical Resistivity (μΩ·m): 0.65 at 20℃
  • Longitudinal modulus of elasticity (kN/mm2): 211 at 20℃

Typical Heat Treatment Specification

For steel bar

  • Annealing: 800 – 920 ℃ (Slow cooling)
  • Quenching: 1050 – 1075 ℃ (Oil cooling)
  • Tempering: 100 – 200 ℃ (Air cooling)

Equivalent

9Cr18MoV steel equivalent to US ASTM AISI SAE, European Germany DIN, British BS, France NF, Japanese JIS, and ISO standard. (for reference)

9Cr18MoV stainless steel equivalent
ChinaUSAGermanyJapanFranceUKISO
StandardGradeStandardGradeStandardGrade (Steel number)StandardGradeStandardGrade (Steel number)StandardGrade (Steel number)StandardGrade
GB/T 12209Cr18MoVAISI,
ASTM A276/A276M
440B,
440C
DIN EN 10088-3;
DIN 17440,
DIN 17222
X90CrMoV18 (1.4112)JIS G4303SUS 440BNF EN 10088-3X90CrMoV18 (1.4112)BS EN 10088-3X90CrMoV18 (1.4112)

LEAVE A REPLY

Please enter your comment!
Please enter your name here